UAV Structural Parts
无人机结构件
Precision CNC machined uav structural parts for OEM/ODM customers.
为 OEM/ODM 客户加工的精密 无人机结构件。
Lightweight Flight Components轻量化飞行组件
CNC Machined Aerospace & UAV Components航空航天与无人机 CNC 组件
We machine lightweight aluminum and stainless structural parts for drones and aerospace imaging — frames, gimbal mounts, camera brackets and payload components with tight tolerances and anodized protection.
我们为无人机与航空影像加工轻量化铝/不锈钢结构件——机架、云台支架、相机挂架与载荷组件，公差严、阳极氧化防护到位。
Why Ruijin为何选择锐金
23+Years年经验
200+CNC MachinesCNC 设备
±0.01mmTolerance加工公差
24hQuote报价响应
Certifications认证资质
IATF 16949ISO 9001ISO 13485
Typical Aerospace & UAV Parts
典型航空航天与无人机零件
Precision parts we produce for OEM/ODM customers worldwide.
我们为全球 OEM/ODM 客户加工的精密零件。
Gimbal Mounts
云台支架
Precision CNC machined gimbal mounts for OEM/ODM customers.
为 OEM/ODM 客户加工的精密 云台支架。
Camera Brackets
相机挂架
Precision CNC machined camera brackets for OEM/ODM customers.
为 OEM/ODM 客户加工的精密 相机挂架。
Payload Components
载荷组件
Precision CNC machined payload components for OEM/ODM customers.
为 OEM/ODM 客户加工的精密 载荷组件。
Technical Capabilities
技术能力
| Material | 材料 | Aluminum 6061 / 7075, stainless steel 304 | 铝 6061/7075、不锈钢 304 |
|---|---|---|---|
| Tolerance | 精度 | ±0.01 mm standard | 标准 ±0.01mm |
| Size range | 尺寸范围 | 5–300 mm | 5–300mm |
| Finishes | 表面处理 | Anodizing, sandblasting, powder coating | 阳极氧化、喷砂、粉末喷涂 |
| Weight focus | 轻量化 | Thin-wall & pocket machining for low mass | 薄壁与减重腔加工，降低整机重量 |
Applications
应用场景
Consumer & Industrial Drones
消费与工业无人机
Airframe brackets, motor mounts and arm joints.
机身支架、电机座与机臂关节。
Aerial Imaging
航空影像
Gimbal plates, camera cages and lens rings.
云台板、相机笼与镜头环。
UAV Payloads
无人机载荷
Sensor housings and quick-release mounts.
传感器外壳与快拆支架。
Frequently Asked Questions
常见问题
Can you machine lightweight thin-wall parts?能否加工轻量化薄壁件？
Yes. We use high-speed machining and optimized fixturing to hold ±0.01mm on thin-wall aluminum pockets without distortion.可以。我们采用高速加工与优化夹具，在薄壁铝腔体上保持 ±0.01mm 且不变形。
What aluminum grades do you use for drones?无人机用哪些铝牌号？
6061 for general structure and 7075 for high-strength stressed components; 304 stainless for fasteners and inserts.结构件用 6061，受力件用高强度 7075，紧固件与嵌件用 304 不锈钢。
Do you offer anodizing for corrosion protection?是否提供阳极氧化防腐？
Yes — hard and decorative anodizing with optional seal, matched to aerospace appearance requirements.提供硬质与装饰阳极氧化，可封孔，满足航空外观要求。
What is the minimum order for UAV parts?无人机零件起订量？
1-piece prototype to bulk production; small-batch runs are welcome.1 件打样到量产，欢迎小批量。